Fence Gates in Lufkin, TX
A gate gets more use than any other part of a fence, which is why it's usually the first part to fail. We build and repair fence gates across Lufkin: walk gates, wide double gates for trailers and mowers, and driveway gates for rural properties.
If your gate drags, won't latch or has dropped an inch since spring, it can almost always be fixed without replacing the fence.
Free gates quote
Takes about 30 seconds. Prefer to talk? (936) 299-5330
Please add your name and a phone number we can reach you at, then send again.
Why gates sag in Lufkin, and how to stop it
Most sagging gates start at the hinge post. In soft, wet clay, a post carrying a heavy wood gate slowly leans toward the opening. A deeper, wider footing on the hinge side, a steel post, or a diagonal brace running from the bottom hinge corner up to the top latch corner keeps the gate square.
Width matters too. A single wood gate much wider than 4 feet works its hinges hard. For mowers, trailers or a boat headed to Sam Rayburn, a double gate with a drop rod usually works better than one wide leaf. Steel-framed gates are worth considering anywhere a wide wood gate has sagged before.
Gate types we install
Walk gates
Three- to four-foot gates matched to your wood, vinyl, chain link or aluminum fence, with self-closing hinges if you have pets.
Double drive gates
Two leaves with a drop rod for 8- to 12-foot openings, with room for a mower, truck or trailer.
Steel-frame wood gates
A welded steel frame with wood pickets to match the fence, built to resist sagging on wide openings.
Ranch and driveway gates
Tube steel or pipe gates for pastures and long driveways, ready for an opener later.
What affects gate pricing
- Width and number of leaves.
- Frame material: wood, steel-frame or all-metal.
- Hinges, latches and locks, including self-closing or pool-rated hardware.
- A new or upgraded hinge post and footing.
- Gate openers and keypad wiring, now or later.
Fence Gates questions
Can a gate that drags on the ground be fixed?
Usually. The fix might be resetting or replacing the hinge post, adding an anti-sag kit or brace, or rebuilding the gate frame. If the post is solid, the repair is often quick and much cheaper than a new gate.
How wide should a gate be for a riding mower?
Measure the mower deck and add at least a foot. Many riding mowers need 5 feet or more, so a 6-foot opening or a double gate is common. For a truck or trailer, plan on 10 to 12 feet.
More fence services
Fence Gates in Lufkin: get your free quote
Whether it's a gate that won't latch or a new double gate for the trailer, call or send the form and a local contractor will take a look.